FSP 150-XG300

High-port count 10G multi-layer demarcation and aggregation

Bandwidth demand is growing by the day. Fueled by changing patterns in services such as mobility, cloud, and video, metro network traffic is rapidly increasing. Communications service providers (CSPs) must quickly transition their infrastructure from 1Gbit/s to 10Gbit/s, and add intelligent demarcation and aggregation capabilities without exceeding space and power consumption

Today’s networks need the bandwidth required for the ever-increasing number of connected devices, business applications, cloud-based services, and enormous amounts of data. High-speed, high-bandwidth networking enables the aggregation, automation and analysis of this data. Offering higher bandwidth services impacts technology installed on the customer premises and creates the need for high-capacity, intelligent demarcation and aggregation capabilities to deliver SLA-based Carrier Ethernet. Our FSP 150-XG300 series addresses this ongoing market demand for scaling from 1GE to 10GE services and allows CSPs to offer price-competitive and high-performance 10GE customers access services.

images not found

Your benefits

  • One device, multiple technologies

    Common hardware architecture for MEF certified CE 2.0, IPv4 / IPv6 and MPLS service demarcation
  • Smooth scalability to 10GbE

    1Gbit/s-to-10Gbit/s aggregation and 10Gbit/s demarcation in two product variants to better match capacity and footprint
  • SLA performance assurance

    Provides SLA performance assurance per traffic flow with service OAM featuring thousands of concurrent OAM session
  • Advanced traffic management

    Up to 2000 queues and up to five levels of hierar-chical QoS with sophisticated traffic managementand policing schemes
  • Multiple network interface options

    Fiber- and copper-based access networks with optional connection over 4G mobile network
  • Hierarchical quality of service

    Using high scale per flow shaping and policing based on MEF 10.3 for enhanced bandwidth optimization.

FSP 150-XG300 Series at a glance

images not found

Applications in your network

Multi-layer demarcation and aggregation solutions

  • Compact and cost-effective solution for CSPs to support increasing consumer demand and offer price competitive and high performance 10GbE (and sub-rates) access services
  • Demarcation at cell sites and with mid-sized business customers as well as large multi-tenant enterprise sites
  • Compact and efficient pre-aggregation solution for transport of Gbit/s services over 10 Gbit/s metro networks
  • Applicable to a wide range of network scenarios by supporting multiple protocols
  • Fast rollout in fiber- and copper-based access networks with optional connection over 4G mobile networks
  • Full visibility of quality of service with comprehensive set of Ethernet and IP-SLA-based service OAM capabilities
  • Optimize transport links with H-QoS and build of broadcast domains using IGMP and PIM in residential access applications
images not found

FSP 150-XG304u modular series service slot modules

images not found

MEF services

  • E-LINE, E-TREE, E-LAN, E-ACCESS
  • MEF 2.0 certified

Layer 1 functionality

  • Virtual cable test – copper TDR
  • SFP digital diagnostics
  • Port mirroring
  • Port protection
  • Port reflection (LIN)
  • Port speed and duplexity capabilities advertising

L2 and L2.5 functionality

  • Bandwidth (Gbps) / forwarding rate (Mpps); non-blocking architecture
  • MEF services and certifications
  • All ports can serve as UNI/NNI
  • Jumbo frames (up to 16,000 bytes) on all ports (per port/EVC)
  • Configurable Ethertype values
  • TLS, Q-in-Q, (802.1Q/802.1ad) – selective VLAN based on ACL + tag range rules
  • VLAN translation based on inner/outer VLAN / 802.1p
  • Tag swap over multi-point EVC
  • Uni-directional link detection protocol (UDLD)
  • Link layer discovery protocol (LLDP)
  • <50ms protection (1:1 link and device protection), LACP1+1 (802.3ad)
  • MSTP (802.1s)
  • ELPS – G.8031/Y.1342
  • ERPS – G.8032/Y.1344 v2
  • Protection and fault recovery based on service OAMmessages/alarms
  • Tunnel/filter of L2 protocols
  • H-VPLS services: H-VPLS spoke MTU-s, MAC withdrawal
  • Up to 64K MAC addresses
  • Learning table limit per VLAN/port
  • Link aggregation (EtherChannel)

L3 functionality

  • Protocols: OSPFv2, OSPFv3, BGP4/BGP4+, IS-IS
  • VRRP, and IP tracking for VRRP
  • Longest prefix match (LPM) / next-hop (NH) tables
  • Static configuration
  • IPv6 routing
  • BFD (bidirectional forwarding detection)
  • VRF-Lite (requires the purchasing of L3 license)
  • IGMP snooping
  • DHCP (client, server, relay, snooping)

Traffic management

  • Hierarchical QoS (H-QoS)
  • CIR/EIR bandwidth granularity (64Kbps steps)
  • 802.1p and DSCP QoS queues no. (per port)
  • Classification by physical port, MAC, Ethertype, protocol,LAN, IP/TCP/UDP, 802.1p (VPT), DiffServ (IPv4 and IPv6TC)
  • Marking/remarking profiles between layers (802.1p, IP ToS / DSCP Bits
  • Scheduling strict priority and 2 levels SDWRR
  • Color awareness UNI per EVC/CoS
  • Egress shaping (per port/queue)
  • In-service circuit parameters changes (on-the-fly ACLs)
  • Per flow SLA metrics (traffic conditioner per service/total services)
  • Statistics of L2 control protocols (STP, LACP, 802.3ah)
  • L1 shaping

Operation, administration and maintenance (OAM)

  • Link OAM -802.3ah EFM (discovery, config, fault, loopback and dying gasp
  • Service OAM 802.1ag CFM – MEP and MIP
  • Service OAM ITU-T Y.1731 PM (latency, jitter) – microsecond accurac
  • Multi-point service OAM
  • Service availability measurement (Y.1563, MEF 10.2)
  • Service resiliency (MEF 10.2.1)
  • MEF SOAM PM – MEF 35 (latency, jitter and synthetic loss per service – SLM) – microsecond accurac
  • Automatic scheduling for PM tests to increase utilization
  • IP SLA – hardware-based measurement for IP VPN (L3)networks – microsecond accurac
  • L2 loopback with MAC swapping (per port/EVC)
  • L2 loopbacks per L2, L3, L4 headers (source/destinationswap)
  • RFC 2544 test head throughput measurement, loss ratio (up to wire-speed GbE)
  • Automated action scheduler for operation of any OAM
  • ITU-T Y.1564 service activation testing
  • Dying gasp message for power failure alarm (EFM-OAM and SNMP trap option)

Security

  • UNI flood limit – DoS protection (broadcast, multicast and unicast rate control
  • Learning table limit – MAC control per EVC
  • Wire-speed ACLs
  • Restricted and controllable configuration access
  • Optional console disable mode
  • DHCP option 82
  • Separate control and data plane
  • 802.1x port based authentication
  • Link flap guard
  • Link flap damping

Management

  • Out-of-band management
  • IPv6 management
  • Command line interface (CLI) via Serial, TELNET, or SSHV1 and 2
  • Simple network management protocol (SNMPv1, v2, and v3
  • Remote monitoring (RMON) – Ethernet statistics (Group 1), history (Group 2), alarm (Group 3), and event (Group 9
  • RADIUS AAA for management
  • TACACS+ AAA for management
  • Upload/download/append configuration files with FTP and SCP
  • Time of day + calendar + time zone
  • Internal syslog + remote syslog + encrypted syslog
  • Support MRV provisioning and network management platform

Additional protocols and features

  • Internet control message protocol (ICMP)
  • Internet group management protocol (IGMP)
  • Linux shell
  • Domain name server (DNS) client
  • Network time protocol (NTP)
  • Mobile backhaul (MBH)
  • CLI/Linux shell commands scheduler
  • Cross connect mode
  • Bootstrap protocol (BOOTP)
  • sFlow (previously RFC3176)

Dimensions and power

  • Dimensions (W x H x D):
  • – FSP 150-XG308, FSP 150-XG304u: 438.66mm x 325mm x 44.45mm / 17.27in x 12.8in x 1.75in (full rack width)
  • – FSP 150-XG304: 217mm x 200mm x 44.45mm / 8.54in x 7.87in x 1.75in (half rack width
  • Operating temperature:
  • – FSP 150-XG304, FSP 150-XG304u and FSP 150-XG308: 0°C to 50°C / 32°F to 122°F
  • – FSP 150-XG304 and FSP 150-XG304u with extended temperature: -40°C to 65°C / -40°F to 149°F
  • Storage temperature: -40°C to 70°C / -40°F to 158°F
  • Humidity: 85%, non-condensing
  • Power supply:
  • – AC input voltage: 90 to 240VAC, 50 – 60 Hz
  • – DC input voltage: 18 to 60V DC
  • Power consumption:
  • – FSP 150-XG308 series: 35W-40W (excluding optics)
  • – FSP 150-XG304 series: 29.5W (excluding optics)
  • – FSP 150-XG304u series: 33W (including VDSL module, excluding optics

Regulatory and standards complianceSafety Agency Approvals

  • UL 60950-1:2007 R10.14
  • CAN/CSA-C22.2 NO. 60950-1-07+A1:2011+A2:2014
  • EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013

Electromagnetic Emission

  • FCC Part 15, Subpart B(class A) radiated emissions
  • EN 55011/CISPR11 radiated emissions
  • EN 55022/CISPR22 radiated emissions
  • EN 55011/CISPR11 conducted emissions
  • EN 55022/CISPR22 conducted emissions
  • EN/IEC 61000-3-2 harmonic emissions
  • EN/IEC 61000-3-3 voltage fluctuations

Immunity

  • EN55024 Information technology equipment Immunity
  • EN/IEC 61000-4-2 ESD
  • EN/IEC 61000-4-3 radiated immunity
  • EN/IEC 61000-4-4 electrical fast transient/burst immunity test
  • EN/IEC 61000-4-5 conductive surges
  • EN/IEC 61000-4-6 conductive disturbances
  • EN/IEC 61000-4-8 immunity to magnetic fields
  • EN/IEC 61000-4-11 voltage dips and short interruptions

Environmental

  • EU 2002/95/EC RoHS2 directive
  • REACH SVHC
  • EU 2002/96/ECWEEE directive