FSP 150-XG210

10Gbit Carrier Ethernet service demarcation and aggregation

Constantly increasing backhaul bandwidth requirements are exhausting the capacity of connectivity networks. Service providers need edge and aggregation devices that enable a seamless transition from 1Gbit/s to 10Gbit/s services, while also addressing stringent customer demands for secure and assured connectivity.

Our FSP 150CC-XG210 provides a high-capacity 10 Gigabit Carrier Ethernet (GbE) aggregation solution enabling costeffective delivery of CE 2.0 services and highly accurate synchronization over fiber-based access networks. The non-blocking design supports traffic aggregation for up to sixteen GbE ports and/or two 10GbE ports provided on hot-swappable access interface modules. Designed for flexibility and scalability, our FSP 150CC-XG210 can be deployed in point-to-point, huband-spoke and resilient access ring topologies. With its multitude of carrier-class protection and resiliency options, the FSP 150CC-XG210 supports the delivery of differentiated and highly reliable Carrier Ethernet 2.0 services across all access network topologies. What’s more our FSP 150CC-XG210 meets stringent privacy and confidentiality requirements by encrypting traffic already at the network edge with our innovative ConnectGuard™ Ethernet technology.

Your benefits

High-speed Carrier Ethernet 2.0 applications
Optimized for high-speed CE2.0 applications supporting up to 40Gbit/s full-duplex capacity
MEF CE2.0 certified UNI/NNI
With hierarchical traffic management scaling up to 1024 Ethernet virtual connections simultaneously
ConnectGuard^™ Ethernet technology
Carrier Ethernet networks can be secured and encrypted without any loss of speed and performance

Unique timing flexibility
Simultaneous support of Synchronous Ethernet and IEEE 1588v2 across packet backhaul networks
Advanced demarcation technology
Enabling stringent service level agreements and integration with a wide range of back-office tools
FSP Service Manager
Part of our advanced network management suite, enables fast service roll out and tracking of big amounts of services

High-level specifications

Applications in your network

Differentiated and highly reliable Carrier Ethernet services

Intelligent Carrier Ethernet 2.0 service demarcation points compliant with the latest OAM standards
Differentiation through service security in addition to end-to-end service level agreements and bandwidth on demand.
Transformation of traditional leased lines into secure and encrypted connectivity

Access capacity

Two slots for access interface modules with hot swap support
1 x 10GbE XFP module
1 x 10GbE SFP+ module
8 x 1GbE (SFP) module
8 x 1GbE (SFP) module with MACsec capability
8 x 1GbE (RJ45) module

Network interface

Two 10GbE (XFP) ports

Network Interface redundancy

IEEE 802.3ad Link Aggregation – active/standby mode with optional load balancing
ITU-T G.8032 Ethernet Ring Protection Switching

Synchronization (optional)

ITU-T G.8261 / G.8262 / G.8264 Synchronous Ethernet on all interfaces
Sync Status Message support
IEEE 1588v2 Precision Time Protocol (G.8265.1 and G.8275.1 PTP Telecom Profiles, G.8273.2 Telecom Boundary Clock)
BITS-in and BITS-out
BITS Sync Status Messaging
Input/output selectable ports for Time of Day, 10MHz clock and Pulse-Per-Second signals (1PPS)
Internal Stratum-3E clock with holdover

VLAN support

4096 VLANs (IEEE 802.1Q customer-tagged) and stacked VLANs (Q-in-Q service provider tagged)
2-tag management (push / pop / swap) for c-tag and s-tag
IEEE 802.1ad Provider Bridging (c-tag, s-tag)
Ethertype translation
1024 Ethernet Virtual Circuits (EVC
9612 byte per frame MTU transparency

Traffic management

Acceptable client frame policy: tagged or untagged
Service classification based on 802.1p, 802.1Q and IP-TOS /DSC
MEF-compliant policing (CIR / CBS / EIR /EBS) with threecolor marking and eight classes of service
Hierarchical queuing and shaping
Rate shaping on transmit for both client and network ports
Broadcast / multicast rate limiting

Ethernet OAM

IEEE 802.3ah EFM-OAM Link managemen
IEEE 802.1ag connectivity fault management (CFM) with hardware assistance
ITU-T Y.1731 performance monitoring
ITU-T Y.1564 service activation testing with MEF-compliant SAT PDUs
Terminal and facility loopbacks on port- and EVC-level for all interfaces
Embedded RFC 2544 test generator and analyzer (ECPA)
MEF-compliant Layer 2 control protocol disposition and extensive filter options for Layer 2 packet types
Link loss forwarding to signal local link and network path failures
Dying gasp message for power failure alarming (EFM-OAM and SNMP trap option)
Environmental alarm inputs (dry contacts)

ConnectGuard™ security¹

L2 MACsec encryption at line rate on a per-EVC basis
End-to-end encryption mode with one or two VLAN tags transmitted in the clear
Robust AES encryption algorithm
Key distribution based on IEEE 802.1X
Diffie-Hellmann key exchange process
Tamper resistant and evident enclosure
Full interoperability with all FSP 150 ConnectGuard™-enabled products
¹FSP 150CC-XG210(C)

Low-touch provisioning

DHCP / BOOTP auto-configuration
IEEE 802.1x port authentication
Text-based configuration file
TFTP / SCP for software image upgrade and configuration file copy

Performance monitoring

RFC 2819 RMON Etherstats on a per-port and per-service basis
15-minute and 1-day performance data bins
IEEE 802.3ah / ITU-T G.8021 PHY level monitoring
ITU-T Y.1731 single- and dual-ended frame loss measurement
Synthetic frame loss and delay measurement for multipoint service monitoring
Multi-CoS monitoring on EVCs scaling up to 4096 simultaneous flows
Threshold-setting and threshold-crossing alerts
Physical parameter monitoring for XFP / SFP+ optics, including TCAs
Temperature monitoring and thermal alarms
MEF-35/36 SOAM PM collection

Management and Security

Local management

Serial connector (RJ45) using CLI
Local LAN port (RJ45) using CLI, SNMP and Web GUI interfaces

Remote management

Maintains in-band VLAN and MAC-based management tunnels

Management protocols

IPv4 and IPv6 DCN protocol stacks, including dual-stack operation and 6-over-4 tunnels
Telnet, SSH (v1 / v2), HTTP / HTTPS, SNMP (v1 / v2c / v3)

Secure administration

Configuration database backup and restore
System software download via FTP, HTTPS, SFTP or SCP (dual flash banks)
Remote authentication via RADIUS / TACACS
SNMPv3 with authentication and encryption
Access control list (ACL)

IP routing

DHCP, RIPv2, OSPF and static routes, ARP cache access control

System logging

Alarm log, audit log and security log

Regulatory and standards compliance

MEF CE 2.0 certified
IEEE 802.1Q (VLAN), 802.1p (Priority), 802.1ag (CFM), 802.3ah (EFM), 802.1x
ITU-T Y.1731, G.8010/Y.1306, G.8011.1+2, G.8012, G.8031 (APS)
MEF-6.1, 9, 10, 11, 14, 20, 21, 22.1, 23.1, 25, 26.1, 30, 33, 35
IETF RFC 2544 (frame tests), RFC 2863 (IF-MIB), RFC 2865 (RADIUS), RFC 2819 (RMON)
MEF-compliant ITU-T Y.1564 service activation testing
ANSI C84.1-1989
ETSI 300 132-2, BTNR2511, ETS 300-019, ETS 300-019-2-[1,2,3], ETS 300-753
NEBS Level 3 certified
Telcordia GR-499, GR-63-CORE, SR-332
Safety IEC / UL / EN 60950, 21CFR1040.10, EN 60825, EN 50371, EN 300-386, EN 50160, IEC 60320/C14
EMI EN 300-386, GR-1089-CORE, ETS 300-132, FCC Part 15, Class A, Industry Canada

Environmental

Dimensions: 1U compact chassis, 439mm x 43mm x 269mm / 17.3” x 1.75” x 10.6” (W x H x D), ETSI-complian
Operating temperature: -40 to +65°C (hardened environment)
Storage temperature: -40 to +70°C (GR-63-CORE
Humidity: 5 to 95%, B1 (non-condensing)
Modular AC-PSU: 90 to 264VAC (47 to 63Hz) with overvoltage and over-current protection
Modular DC-PSU: -36 to -72VDC or +18 to +30VDC with over-voltage and over-current protection
Maximum power consumption: 100W